Home | My Account | Contact Us | Shopping Cart Shopping Cart - 0 item(s) / Total: $0
Light Fixtures
Courtesy Lights
Small Recessed
Large Recessed
Reading Lights
Flood & Deck Lights
Surface Fixtures
Wall Lights
LED Strips
Navigation Lights
Engine Room Lights
Chart Lights
Underwater Lights
Dock Lighting
Work Boat Lights
Switches & Dimmers
Electrical Box
Face Plates
Support Grids
Cables & Terminals
Cable & Wire
Terminals & Connectors
Fuse & Terminal Blocks
Light Bulbs
LED Bulbs
LED Conversion Kits
Halogen Bulbs
Incandescent Bulbs
Specialty Bulbs
Power Supply
Clearance Items
Made in USA
E-Series 10 E-Series 10" Flush Mount Bucket
Vertical Bar Mount Clamp
Signature Series - LED Deck Light Kit

Secured by PayPal
2.2W LED Bulb G4 Back-Pin

2.2W LED Bulb G4 Back-Pin

4 Review(s)
Part Number:TL30613V
Manufacturer: TritonLED

Choose Options

Select Light Color
Quantity Pricing
  • 1 - 10
  • $15.95
  • 11 - 50
  • $13.95
  • 51+
  • $12.95

2.2W LED G4 Replacement Bulb
Socket Type
G4 Bi-Pin
Dimension 1.25" Diameter
Input Voltage 10-30VDC or 12VAC
Power (Watts) 2.2W
Current Draw 0.18 amps @12V
Light Color Warm White or Cool White
LED Quantity
10 x SMD LEDs
Beam Angle 120 Degrees
Lumens Output 152 Lumens

Rating 2.2W LED bulb G4 Back-Pin
These work well and are great replacements. I did have to bend the 2 pins 90 degrees to plug in with the risk of shorting. Some black tape fixed that. Previous models had 2 side pins which eliminated that problem.
  Reviewed by:   from San Diego. on 9/1/2014
Rating 41' Sea Ray
replaced 6 bulbs this week with cool white LED. Much brighter light with virtually no power draw. Looking to replace 6 more this week with warm white.
  Reviewed by:   from Lake Cumberland, Ky. on 7/25/2011
Rating Mr.
Bought 2 cold white for reading lightsin bunk. Excellent light for reading with little draw. If I did over would buy warm white just bcause it would be cozyer although not quite as bright.
  Reviewed by:   from Essex CT. on 7/16/2011
Rating g4 conversion
This LED bulb workd great and is a lot brighter than my old halogyn.One tip take out the reflector so it fits properly.
  Reviewed by:   from surrey bc canada. on 3/16/2011

Questions and Answers
Q: How precise is the listed voltage? For example, would this work in a flashlight with 6 volts? (I see the specified range is 8 - 30 v and was hoping for some wiggle room)
Asked by: Dave - 10/1/2013 (Submit an answer)
A: These LED replacement bulbs will only work 8-30V.
Answer provided by:  Vanessa (10/2/2013)
Q: Who makes your LED G 4 bulbs 2.2 watt, and where are they made? Thanks
Asked by: Jim - 9/13/2014 (Submit an answer)
A: They are manufactured in Europe for us.
Answer provided by:  YachtLights (9/15/2014)

Related Items